Thursday, September 10, 2020

T-Mobile hits 5.6 Gbps with Ericsson's 16-layer MU-MIMO

 T-Mobile achieved peak cell throughput of more than 5.6 Gbps on one channel of 2.5 GHz spectrum in a demonstration of 16-layer multi-user multi-input multi-output (MU-MIMO) technology.The demonstration achieved more than 700 Mbps on each device in the cell. 

The demonstration used Ericsson's commercially available massive MIMO radio with 64 antennas from Ericsson and OnePlus 8 5G smartphones. Sixteen unique streams of data were transmitted — each stream capable of hitting more than 350 Mbps.  With two data streams for each device, a total of 700+ Mbps for each smartphone was achieved.

T-Mobile said it expects to begin deploying the technology this year. 

“This is what you get when you pair T-Mobile’s unmatched spectrum portfolio with the best damn team in wireless — innovation that changes the game for the entire industry,” said Neville Ray, President of Technology at T-Mobile. “We have a 5G network that’s second to none, and it’s getting better by the day thanks to our amazing engineers and partners. Just wait until you see what they do next for our customers!”

In tech terms, with 100 MHz of total 5G spectrum in the demonstration, T-Mobile was able to achieve an 50+ bps/Hz in spectral efficiency. 

https://www.t-mobile.com/news/network/t-mobile-achieves-mind-blowing-5g-speeds-with-mu-mimo

FCC Forum on 5G Open RAN - Monday, Sept 14, 10:30 EST

The FCC will host a Forum on 5G Open Radio Access Networks on Monday, September 14, 2020. 

Among the speakers on the agenda for the forum are: 

10:30AM-10:45AM (EST): Welcome Remarks 

FCC Chairman Ajit V. Pai 

U.S. Secretary of State Michael R. Pompeo 

10:50AM-11:30AM: Introduction to Open, Interoperable, and Virtualized Networks

FCC Chairman Ajit V. Pai, moderator 

  • Tareq Amin (Rakuten) 
  • Caroline Chan (Intel) 
  • Sachin Katti (VMware) 
  • Thierry MaupilĂ© (Altiostar) 

11:45AM-12:45PM: Benefits of Deployment/Driving Innovation 

Wireless Telecommunications Bureau Associate Bureau Chief Charles Mathias and Office of the Chairman Policy Advisor Evan Swarztrauber, moderators 

  • Cristiano Amon (Qualcomm) 
  • Peter Gammel (GlobalFoundries) 
  • Diane Rinaldo (Open RAN Policy Coalition) 
  • John Roese (Dell) 
  • Mariam Sorond (CableLabs) 
  • Soma Velayutham (NVIDIA) 

1:40PM-2:50PM: Lessons from the Field: Where Do We Go from Here? 

FCC Chairman Ajit V. Pai, moderator  

  • Kaitki Agarwal (Parallel Wireless) 
  • John Baker (Mavenir) 
  • Stephen Bye (DISH) 
  • Craig Farrell (IBM) 
  • Marie-Paule Odini (HPE) 
  • Mathew Oommen (JIO)
  • Marcus Weldon (Nokia) 

3:00PM-5:00PM: Technical Deep Dive 

FCC Chief Technology Officer Monisha Ghosh, moderator 

  • Mihai Banu (Blue Danube) 
  • Charles Clancy (MITRE) 
  • Cheryl Davis (Oracle) 
  • Ashutosh Dutta (Johns Hopkins University)
  • Abhimanyu Gosain (Northeastern University) 
  • James Kimery (Spirent) 
  • Ivan Seskar (Rutgers University) 
  • Jacobus Van der Merwe (University of Utah) 


http://www.fcc.gov/live


FCC chairman pitches 3.45-3.55 GHz band for 5G

Federal Communications Commission Chairman Ajit Pai has circulated a petition to his fellow commissioners to make the 3.45-3.55 GHz band available for commercial use throughout the contiguous United States. 

“We are moving forward quickly, in coordination with the Executive Branch, to ensure that this mid-band spectrum is available for commercial 5G deployment.  This is another major step forward in advancing American leadership in 5G and producing benefits for America’s wireless consumers,” said Chairman Pai.  “Our 5G FAST Plan is in full swing.  With this 3.45 GHz band proposal, the upcoming C-band auction of 280 megahertz of spectrum, and the recently completed auction for Priority Access Licenses in the 3.5 GHz band, the Commission is on track to make a wide swath of 530 megahertz of continuous mid-band spectrum available for 5G.  Combined with our work to make low- and high-band spectrum available for flexible use as well as our successful efforts to expedite the deployment of wireless infrastructure and fiber, we are establishing a strong foundation for wireless innovation and investment.  I hope my colleagues will join me in supporting this important item at our monthly meeting.”

Credo intros DSP for 5G front- and mid-haul

Credo introduced a DSP for optical modules used in 5G front- and mid-haul wireless networks. 

The Credo Seagull 50, CFD10101, is a versatile full-duplex product that can be used in next-generation QSFP28, DSFP, and SFP56 pluggable optical transceivers. It supports 50Gbps SR/DR/FR/LR and ER applications based on PAM4 modulation. 

Seagull 50 operates over the full industrial temperature range of -40oC to +85oC module case and is ideal for use in datacenters and 5G wireless/eCPRI front-, mid- and backhaul applications.

The DSP can be used as a gearbox or retimer. In gearbox mode, the IC is configured as two lanes of 24.33-25.78Gbps NRZ on the host side to one lane of 50.135-53.125Gbps PAM4 on the line side. In retimer mode, the DSP is configured as one lane of 50.135-53.125Gbps PAM4 to one lane of 50.135-53.125Gbps PAM4. 


https://www.credosemi.com/releases/2020/9/7/credo-introduces-seagull-50-pam4-dsp-to-drive-front-and-mid-haul-5g-wireless-networks

Semtech samples 5G CDR with single-ended EML laser driver

 Semtech has begun sampling its new ClearEdge Clock and Data Recovery (CDR) IC, which integrates a single-ended EML laser driver optimized to enable the use of alternative optics for 5G. The company claims its platform offers the lowest power and smallest package size for SFP28 LAN-WDM (LWDM) optical modules.

Semtech’s ClearEdge (GN2154) IC enables industry-leading performance in LWDM modules with low cost EML lasers, while offering ultra-low power of 550mW typical (with 1.85VppSE driver swing) in a small 3.24mm x 2.05mm WLCSP package. 

Semtech’s ClearEdge CDR and FiberEdge PMD platform for 5G applications includes:

  • 25G SFP28 300m LR-lite, LR 10km, BiDi, CWDM, MWDM optical modules
  • GN2152: Bi-directional 24-28G ClearEdge CDR with Integrated DML driver
  • GN1086: Next generation 24-28G FiberEdge TIA
  • 25G SFP28 LWDM optical modules
  • GN2154: Bi-directional 24-28G ClearEdge CDR with Integrated SE EML driver
  • GN1086: Next generation 24-28G FiberEdge TIA
  • 25G SFP28 DWDM, Tunable optical modules
  • GN2146: Bi-directional 24-28G ClearEdge CDR with Integrated EML / MZM driver
  • GN1086: Next generation 24-28G FiberEdge TIA

“Semtech has worked closely with its customers and laser partners to understand the challenges of developing an effective solution for LWDM optical transceiver modules and we believe this is a truly disruptive solution in this space,” said Raza Khan, Senior Market Manager for Semtech’s Signal Integrity Products Group. “Semtech offers a broad and unique portfolio to enable complete 5G wireless solutions with an extensive range of module requirements. We expect to continue leading the 5G wireless market with innovative IC offerings.”


Broadband Forum advances its technical work program

The Broadband Forum added Mike Talbert, of Verizon, and Ding Hai, of China Unicom, to its board of directors. Their appointments follow the retirement of Broadband Forum President Tom Starr, of AT&T, who has held a Board position for 26 years. He is succeeded by Bernd Hesse, of Calix.

The Broadband Forum announced the following advancements in its technical work following its recent virtual Q3 meeting:

  • The Broadband User Services Work Area is working alongside the prpl Foundation to explore how using USP can create interoperable smart gateways that provide application developers with an easy way to build new services to operate on the gateway. 
  • The Open Broadband – Broadband Access Abstraction (OB-BAA) project team finalized its fourth major release of its reference implementation of the CloudCO's BAA layer which enables vendors to provide support for white box implementations for various types of access nodes using either standard adapters or via vendor specific adapters, while the OB-USP-Agent Work Area’s Canary Release is nearing completion. This release focuses on providing support for MQTT and Architecture improvements to better support OpenWRT/prplWRT and RDK-based implementations. 
  • The Physical Layer Transmission Work Area published its Test Plan related to Reverse Power Feed (TR-338), which specifies a set of test cases and related pass or fail requirements for reverse powering of remote network nodes from customer premises equipment.
  • The Q3 meeting – which took place from Monday, August 31 to Friday, September 4 – also saw Broadband Forum confirm the next dates of its vBASe series. It will host its first-ever virtual demo at Broadband World Forum, from October 13-15, showcasing the latest developments of its OB-BAA open source project. A panelist session on the Connected Home, along with a live Q&A, will also be held.
  • vBASe North America will then take place on October 26, with a theme of “2020 Lessons, 2021 Reality”, while vBASe Australia will see Broadband Forum team up with nbn to provide three weekly 90 minute sessions to deliver a market update.

“Broadband Forum has always worked closely with operators across the globe, as they provide us with unique insight into what is important for the industry and ensure that our work remains at the cutting-edge,” said Broadband Forum Chairman John Blackford. “These latest board appointments build upon that collaboration as we come to the beginning of an incredibly exciting period for Broadband Forum. We are continuing to make great strides in 5G convergence, our User Services Platform (USP) efforts are continuing to gain momentum, and we have a new open source project launching that could be a true game changer for gigabit broadband.”

https://www.broadband-forum.org/


NTT Ltd. teams with India's AlefEdge on edge services

NTT Ltd. and AlefEdge announced their collaboration in India to deliver the power of 5G based edge internet to application developers through AlefEdge’s Software-Defined Mobile Edge Platform. 

The companies are targetting the next generation of ultra-low latency and ultra-high-definition edge enhanced application services.

“Edge computing technology offers the ability to craft creative solutions for advanced applications that need low latency and remote processing. Edge computing is the answer to the growing demand for cloud computation and storage to be much closer to where it is needed, and not only in central locations,” said Lux Rao, Senior Director - Solutions, NTT Ltd. (India). “With a system integration and services portfolio that includes consulting, managed, and infrastructure services, NTT Ltd. can help roll out edge computing solutions that will transform application and network delivery economics in every industry in new ways,” he added.

http://www.hello.global.ntt



Iraq's Alsard Fiber deploys ADVA FSP 3000

Alsard Fiber, a wholesale provider in Iraq, is using ADVA's FSP 3000 OLS technology to provide extremely resilient, high-capacity services across Iraq s for its ISP, telecom, government and business customers. 

The network uses ADVA’s multi-degree ROADMs, which automatically reroute traffic in the case of fiber breaks, along with ADVA's ALM fiber monitoring technology, empowering it to remotely identify areas of degradation and rapidly locate faults, boosting reliability and significantly reducing cost.

“What we needed from this deployment was high capacity, resilience and the ability to guarantee our stringent SLAs. ADVA’s technology gives us a network that delivers on all counts. Now we can support our huge customer base with a redundant, monitored and robustly protected fiber backbone able to provide fast and reliable services and ready to withstand the most difficult environments,” said Firya Mohammad Ali, CEO, Alsard Fiber. “We’ve invested heavily in our fiber plant. Our network stretches thousands of kilometers across the country and this new solution helps us realize the full value of our assets. It enables us to boost efficiency and reliability and ensure the stability that our customers demand.”